Vancouver, BC – Rockridge Resources Ltd. (TSX-V: ROCK) (OTCQB: RRRLF) (Frankfurt: RR0) (“Rockridge” or the “Company”) is pleased to announce that it plans to conduct a diamond drilling program at its Raney Gold Project located southwest of Timmins, Ontario, Canada (the “Raney Gold Project” or “Property”). The results of the recently completed summer field program will assist in delineating and prioritizing drill targets over the broad structural corridor that hosts the high-grade gold mineralization.
Raney Gold Project Location Map:
Plan Map Showing Exploration Potential Along Extensive Structural Corridor:
Diamond Drilling Program:
The gold mineralization at the Raney Gold Project is associated with local concentrations of narrow quartz veins that occur within a structural corridor. The structural corridor that hosts the mineralization is up to 125 metres wide and extends well beyond the small area tested by drilling. Historic mapping and surface sampling data show that the zone may extend over several kilometres along strike, with no drilling conducted along this corridor except for the ~225-metre-long main zone drill tested previously. A notable disruption in the airborne magnetic data approximately two kilometres west of the area where drilling has been concentrated and in line with the projected structural corridor provides a compelling target area.
A diamond drilling program of a minimum of 3,000 metres in approx. 10 diamond drill holes is planned to test priority targets along the prospective corridor. A primary drill target will be the down-dip extension of the previously reported high-grade zone in previously reported hole RN 20-06 which returned 28.0 g/t Au over 6.0 m from 125.0 m to 131.0 m. Furthermore, results from the recently completed summer field program, which consisted of a drone magnetometer survey, detailed prospecting and mapping, and a geochemical orientation survey will assist in delineating and prioritizing target areas for drill testing.
Cross Section of High-Grade Gold Mineralization in Hole RN 20-06:
Raney Gold Project Location:
The Raney Gold Project is located within the highly prospective west extension of the Abitibi Greenstone belt, proximal to several regional deposits. Newmont’s Borden Gold mine (reserves of 4.17 MT @ 6.38 g/t Au for ~860k oz. Au reported in 2015) is located 35 km west of Raney. IAMGOLD and JV partner Sumitomo Metals Mining recently made a decision to proceed with construction of their Cote gold project located 75 km southeast of Raney. The Cote project, estimated to contain gold reserves of ~7 million ounces (~236MT @ 0.96 g/t Au), is noted as a “world-class” deposit by IAMGOLD. GFG Resources is a close neighbour that has acquired a large land package in the area including its Pen and Dore Gold Projects.
Raney Gold Project Geology and History:
A total of 2,070 metres in nine diamond drill holes were completed during the recent winter diamond drilling program. The drill program focused on the main zone over a strike extent of approximately 225 metres that produced the best historic intercept of 6.5 g/t gold over 8.0 metres back in 2010. Silicification and minor carbonate alteration were recognized, however gold mineralization appears to be closely related to intervals of high quartz vein density. The quartz veins are hosted in a steeply dipping alteration zone dominated by intermediate volcanic rocks consisting of lapilli tuffs and bedded argillites, with lamprophyre dikes. The quartz veins crosscut and run parallel to a weak fabric, and range in thickness from 0.5 cm to 20 cm in width.
A zone of increased vein density has been noted where the historic visible gold intercepts occur. The recently drilled high-grade intercept of 28.0 g/t over 6.0 metres (uncut) from the 2020 winter program was the fourth drill hole on the Property to intercept visible gold, and all these occurrences were in the main zone near the 100-metre level. The broad structural corridor that hosts the mineralization is up to 125 metres wide and extends well beyond the area tested by drilling. No drilling has been conducted along this corridor except for the ~225-metre-long main zone.
Historical drilling at the Raney Gold Project focused on identifying near-surface gold mineralization. Previous exploration on the Property from 1972 to 1991 consisted of prospecting, mapping, sampling, trenching, winkie drilling, ground geophysics, stripping, and some limited diamond drilling. This was followed by exploration work during the 2009 to 2010 period. The best intercept returned from historical drilling was 6.5 g/t gold over 8.0 metres. The property is underlain by mafic volcanics to the north, and felsic to intermediate volcaniclastics to the south. The felsic volcaniclastics are host to the gold zones. Quartz feldspar porphyry dykes and sills and minor mafic intrusives occur throughout the Property. The porphyries are generally massive but may be sheared and hydrothermally altered and veined in places.
A 100 metre-wide intensely sheared and altered quartz-feldspar porphyry body is located just to the south of the main Raney gold showing. Gold mineralization exposed on the surface and intersected in drill holes on the property is typical of the lode gold class of gold deposit which is the dominant gold deposit type in the Abitibi Greenstone Belt. Gold mineralization on the property is associated with the intensely sheared and altered zones within the felsic tuffs, and higher grades tend to occur where quartz veining is present.
The Property is in the Archean Swayze Greenstone Belt, considered to be the southeast extension of the Abitibi Greenstone Belt, which hosts the world-class Timmins and Kirkland Lake gold districts. Numerous gold occurrences occur throughout the district and several world-class mines have been developed. These deposits are responsible for a significant portion of the world’s cumulative gold production and are often characterized by gold enriched quartz vein systems associated with supracrustal belts in low to medium grade metamorphic terranes. Gold mineralization at the Property is typical of the mesothermal lode gold deposit model. Rockridge holds an option to earn a 100% interest in the Raney Gold Project.
Todd Keast, P.Geo., a “qualified person” for the purposes of National Instrument 43-101 - Standards of Disclosure for Mineral Projects, and the Raney Gold Project Manager for Rockridge Resources Ltd., has reviewed and approved the scientific and technical disclosure in this news release.
About Rockridge Resources Ltd.
Rockridge Resources is a publicly traded mineral exploration company focused on the acquisition, exploration, and development of mineral resource properties in Canada and other mining-friendly jurisdictions. The Company’s Raney Gold Project is a high-grade gold exploration project located in the same greenstone belt that hosts the world-class Timmins and Kirkland Lake lode gold mining camps. The Company's Knife Lake Project is in Saskatchewan, which is ranked as the #3 mining jurisdiction in the world by the Fraser Institute. The project hosts the Knife Lake deposit, which is a VMS, near-surface copper-cobalt-gold-silver-zinc deposit open along strike and at depth. Rockridge’s goal is to maximize shareholder value through new mineral discoveries, committed long-term partnerships, and the advancement of exploration projects in geopolitically favourable jurisdictions.
Additional information about Rockridge Resources and its project portfolio can be found on the Company’s website at www.rockridgeresourcesltd.com. Rockridge currently has 51.1 million shares issued and outstanding.
Rockridge Resources Ltd.
For further information contact myself or:
Jordan Trimble, President or
Simon Dyakowski, Corporate Development
Rockridge Resources Ltd.
Toll Free: 800-567-8181
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THE CONTENT OF THIS NEWS RELEASE.
Forward Looking Information
Statements included in this announcement, including statements concerning our plans, intentions and expectations, which are not historical in nature are intended to be, and are hereby identified as, “forward-looking statements”. Forward-looking statements may be identified by words including “anticipates”, “believes”, “intends”, “estimates”, “expects” and similar expressions. The Company cautions readers that forward-looking statements, including without limitation those relating to the Company’s future operations and business prospects, are subject to certain risks and uncertainties that could cause actual results to differ materially from those indicated in the forward-looking statements.